Last modified 2 years ago
You are here: Manual / Data Types / How to generate a truncated distribution?
TracNav
Table of Contents
- About this Wiki
- About the STG (SEAMCAT Technical Group)
- About the source code
- Frequently Asked Questions
- How to register on TracTool?
- Tutorial videos
- Known Issues
- Disclaimer
Introduction
Main structural elements of SEAMCAT
Data elements
- SEAMCAT Data types
- Function entry
- Emissions mask
- Random distributions
- Antenna
- Signal vectors
- How to generate a truncated distribution?
Simulation workspace
Creating SEAMCAT scenario
- Simulation scenario and its programming
- Victim link tab
- Interfering link tab
- Sharing and importing scenarios
Performing a simulation
- Simulation control settings
- Running a simulation (event generation)
- Calculating probability of interference
- Simulation results overview
- Generic system results
- Simulation report
- Logging options and remote server
- Saving results format
CDMA module
- CDMA system tab
- CDMA Link level data
- CDMA simulation algorithm
- CDMA input parameters
- CDMA output results
OFDMA module
Cognitive Radio System module
Library of scenario elements
- Library overview
- Antenna elements
- Spectrum emission mask elements
- Receiver blocking mask elements
- Receiver elements
- Transmitter elements
- CDMA Link level data
- CDMA-OFDMA network
- Propagation model plugins
- Post processing plugins
Propagation models
- Guide to propagation models in SEAMCAT
- How to test propagation model?
- ITU-R P.1546 model
- Extended Hata and Hata-SRD models
- Spherical diffraction model
- Free Space Loss model
- User-defined model (Propagation plug-in)
- JTG5-6 propagation plug-in
- SE42 propagation plug-in
- Longley Rice propagation plug-in
- Winner propagation plug-in
- IEEE 802.11 Model C (modified) plug-in
Special functions
Detailed algorithms/Calculations
- Wanted signal (dRSS)
- Unwanted and blocking signals (iRSS)
- Overloading (iRSS)
- Intermodulation signal (iRSS)
- CDMA simulation algorithm
- OFDMA simulation algorithm
- Location of VLR with ILT (Simulation Radius)
- Location of VLR and ILR (Coverage radius)
- Azimuths and elevations (IT-VR path)
- Azimuths and elevations (within a link)
- Blocking attenuation (VLR)
- unwanted emissions (ILT)
- Power control gain (ILT)
Annexes
Release to be tested by STG
How to generate a truncated distribution?
This page presents an example on how to use the user define function in SEAMCAT to generate a specific distribution.
Especially the attached document gives a step by step procedure to generate this vector 
from that vector 
Attachments
-
Using the user define function in SEAMCAT.doc
(517.5 KB) -
added by jean-philippe 2 years ago.
-
figure1.gif
(44.8 KB) -
added by jean-philippe 2 years ago.
-
figure2.gif
(48.5 KB) -
added by jean-philippe 2 years ago.
