You are here: Manual / Library / Receiver blocking mask


Library: Receiver blocking mask elements

To create or modify a library element containing parameters of a particular blocking mask, select the Receiver blocking masks command from the Library pull-down menu or directly with CTRL+SHIFT+B.

A list of existing pre-defined receiver blocking mask (if you have not created any before) will be selectable as shown in the picture below:

The command library are explained in the library overview

When adding a new receiver blocking mask, you need to enter the name (unique identifier), description of its technical parameters (which standard? which ECC Report?).

Note 1: You can quickly scroll up and down and see the differences in the blocking masks.

Note 2: You can create a blocking mask from the workspace and export it to your library environment