You are here: Manual / Library / Transmitter

---

Library: Transmitter elements

To create or modify a library transmitter element, select the Transmitters command from the Library pull-down menuor directly with CTRL+SHIFT+T.

This activates the Transmitter Library window which displays a list of existing transmitter elements in the library. You will note that it is the same interface as in the workspace so that it is easy for you to fill. If you have not created previously a transmitter, the list will contain only the DEFAULT transmitter element:



The command library are explained in the library overview

The parameters of transmitter are grouped in 4 different panels:

• Transmitter identification: to define name (unique identifier), description.
• Antenna pointing: It contains all information relative to the antenna other than the radiation pattern.
• Antenna patterns identification: to define a specific antenna to be associated with that particular receiver. Note that you can select one of the existing antenna library elements or define completely new antenna parameters to be associated only with the given receiver.
• Emission characteristics: to define the basic transmission features, such as power, spectrum emission mask function, etc..

Note 1: You can quickly scroll up and down and see the differences in the transmitters.

Note 2: You can create a transmitter from the workspace and export it to your library environment

.