wiki:Manual/Simulation/EventGenerationResults

You are here: Manual / Simulation / Event Generation Results

TracNav


Event Generation Results

After running a simulation with generic system, the following simulation results will become available:

  • generated desired and undesired signals
  • coverage and simulation radius calculation results


Calculated radius

The calculated radius folder contains the values of the coverage and/or simulation radiuses calculated for the event generation.

  • Victim receiver coverage radius if correlation mode of the victim link is set to uncorrelated
  • Interfering transmitter coverage radius for each interfering link for which the correlation mode of the IT-WR path is set to uncorrelated
  • Interfering transmitter simulation radius for each interfering link for which the correlation mode of the IT-VR path is set to uncorrelated

Generated desired and undesired signals

  • dRSS folder
    • dRSS vector
  • iRSS blocking folder
    • one iRSSblocking vector for each interfering link
    • one vector for the sum
  • iRSS unwanted folder
    • one iRSSunwanted vector for each interfering link
    • one vector for the sum
  • iRSS intermodulation folder
    • one iRSSintermod vector for each combinatory couple in case there are more than one interfering link
    • one vector for the sum
  • Delta overloading folder
  • Cognitive radio

Each of these signals are displayed with indicated vector type and size, where size is the number of valid generated events, each corresponding to a vector point.

Double-clicking on one of these signals activates the signal dialog window which display the signal in graphical form as well as its statistical features.

Attachments